Hands-On with Automotive Electronic Control System

Hands-On with Automotive Electronic Control System

By Taking this course, you will have knowleege about: - Functions of Actuators in Gasoline Engine and Control signal - Functions of actuators in Diesel engines and control signals. - Working principle of Sensors and Actuators in automotive vehicles - The simulation of the signal from sensors and the control Signal for the actuator. - The structure of the Engine control units and the inside Experimental function blocks

View Course details

Etp Lab · July 17, 2026

Course Content

PART I: THE GASOLINE ENGINE SYSTEM

1.1. Working Principle of SI (Spark – ignition) – Gasoline Engine System

2.1. Working Principle of the diesel Engine

2.2. Analysis of Sub-systems of Common Rail Diesel Engine

PART II: THE DIESEL ENGINE SYSTEM

1.3. The Actuators and Sensors of the gasoline Engine

3.1. Mass Air Flow Sensor – MAF

PART III: THE AUTOTMOTIVE SENSORS AND ACTUATORS

3.2. Crankshaft Position sensor

3.3. Camshaft Position Sensor – CMP

3.4. Synchronization of operation of the Camshaft Position sensor and the Crankshaft position sensor (CMP-CKP Sync)

3.5. The Potentiometer Sensors: Accelerator Pedal Sensor (APS) and Throttle Position Sensor (TPS)

3.6. Oxygen sensor (or Lambda sensor, or A/F sensor)- LS

4.1. ECU function block Diagram

PART IV: ANATOMY OF ENGINE CONTROL UNIT (ECU) AND CORE FUNCTION WORKING CIRCUITS

4.2. The Voltage Regulator Circuit

4.3. The Analog Signal Amplifier Circuit

4.4. The Analog to Digital Converter (ADC) in the ECU

4.5. The Pulse Processing Circuit in the ECU

4.6. The Vibration Detection Circuit in the ECU

4.7. The Power Switching Circuits

4.8. The Power Drive Circuit in the ECU

4.9. The Data communication circuit in the ECU

1 of 2

About Instructor

Etp Lab

4 Courses

Responses